Skip to content

Darsync

Darsync is a tool used to prepare your project for transfer to Dardel. It has two modes; check mode where it goes through your files and looks for uncompressed file formats and counts the number of files, and gen mode where it generates a script file you can submit to Slurm to do the actual data transfer.

The idea is to

  1. Run the check mode and mitigate any problems problems it finds.
  2. Run the gen mode.
  3. Submit the generated script as a job.
flowchart TD
  check[Check files]
  generate[Generate script for transferring files safely]
  submit[Submit script]

  check --> |no errors| generate
  check --> |errors that need fixing| check
  generate --> |no errors| submit

The Darsync workflow

Temporarily add a PATH

Until the darsync script is added to the /sw/uppmax/bin folder you will have to add its location to your PATH variable manually:

export PATH=$PATH:/proj/staff/dahlo/testarea/darsync

TLDR

If you know your way around Linux, here is the short version.

# run check
darsync check -l /path/to/dir

# fix warnings on your own

# book a 30 day single core job on Snowy and run the rsync command
rsync -e "ssh -i ~/.ssh/id_rsa" -acPuv /local/path/to/files/ username@dardel.pdc.kth.se:/remote/path/to/files/
How does that look like?

Running the temporary export gives no output:

[sven@rackham4 ~]$ export PATH=$PATH:/proj/staff/dahlo/testarea/darsync

The folder GitHubs is a folder containing multiple GitHub repositories and is chosen as the test subject:

[sven@rackham4 ~]$ darsync check -l GitHubs/


   ____ _   _ _____ ____ _  __
  / ___| | | | ____/ ___| |/ /
 | |   | |_| |  _|| |   | ' /
 | |___|  _  | |__| |___| . \
  \____|_| |_|_____\____|_|\_\

The check module of this script will recursivly go through
all the files in, and under, the folder you specify to see if there
are any improvments you can to do save space and speed up the data transfer.

It will look for file formats that are uncompressed, like fasta and vcf files
(most uncompressed file formats have compressed variants of them that only
take up 25% of the space of the uncompressed file).

If you have many small files, e.g. folders with 100 000 or more files,
it will slow down the data transfer since there is an overhead cost per file
you want to transfer. Large folders like this can be archived/packed into
a single file to speed things up.
GitHubs/git/scripts


Checking completed. Unless you got any warning messages above you should be good to go.

Generate a Slurm script file to do the transfer by running this script again, but use the 'gen' option this time.
See the help message for details, or continue reading the user guide for examples on how to run it.
https://

darsync gen -h

A file containing file ownership information,
darsync_GitHubs.ownership.gz
has been created. This file can be used to make sure that the
file ownership (user/group) will look the same on Dardel as it does here. See https:// for more info about this.
NBIS staff test project code

Follow the project application procedure as described here. Request permission to join project NAISS 2023/22-1027

Check mode

To initiate the check mode you run Darsync with the check argument. If you run it without any other arguments it will ask you interactive questions to get the information it needs.

# interactive mode
darsync check

# or give it the path to the directory to check directly
darsync check -l /path/to/dir

The warnings you can get are:

Too many uncompressed files

It looks for files with file endings matching common uncompressed file formats, like .fq, .sam, .vcf, .txt. If the combined file size of these files are above a threshold it will trigger the warning. Most programs that uses these formats can also read the compressed version of them.

Examples of how to compress common formats:

# fastq/fq/fasta/txt
gzip file.fq

# vcf
bgzip file.vcf

# sam
samtools view -b file.sam > file.bam
# when the above command is completed successfully:
# rm file.sam

For examples on how to compress other file formats, use an internet search engine to look for

how to compress <insert file format name> file

Too many files

If a project consists of many small files it will decrease the data transfer speed, as there is an overhead cost to starting and stopping each file transfer. A way around this is to pack all the small files into a single tar archive, so that it only has to start and stop a single time.

Example of how to pack a folder and all files in it into a single tar archive.

# pack it
tar -czvf folder.tar.gz /path/to/folder

# unpack it after transfer
tar -xzvf folder.tar.gz

Once you have mitigated any warnings you got you are ready to generate the Slurm script that will preform the data transfer.

Gen mode

To generate a transfer script you will need to supply Darsync with some information. Make sure to have this readily available:

  • ID of the UPPMAX project that will run the transfer job, e.g. naiss2099-23-99
  • If you don't remember if, find the name of the project you want to transfer by looking in the list of active project in SUPR.
  • Path to the folder you want to transfer, .e.g. /proj/naiss2099-23-999
  • Either transfer your whole project, or put the files and folder your want to transfer into a new folder in your project folder and transfer that folder.
  • The project's folder on UPPMAX will be located in the /proj/ folder, most likely a folder with the same name as the project's ID, /proj/<project id>, e.g. /proj/naiss2024-23-999. If your project has picked a custom directory name when it was created it will have that name instead of the project ID, e.g. /proj/directory_name. Check which directory name your project has by looking at the project's page in SUPR and look at the field called Directory name:
  • Your Dardel username.
  • You can see your Dardel username in SUPR
  • The path on Dardel where you want to put your data, e.g. /cfs/klemming/projects/snic/naiss2099-23-999
  • Check which project ID you have for your project on Dardel in the list of active project in SUPR.
  • The path to the SSH key you have prepared to be used to login from Rackham to Dardel, e.g. ~/.ssh/id_rsa
  • Check
  • The path to where you want to save the generated transfer script.

To initiate the gen mode you run Darsync with the gen argument. If you run it without any other arguments it will ask you interactive questions to get the information it needs.

# interactive mode
darsync gen


# or give it any or all arguments directly
darsync check -l /path/to/dir/on/uppmax/ -r /path/to/dir/on/dardel/ -A naiss2099-23-99 -u dardel_username -s ~/.ssh/id_rsa -o ~/dardel_transfer_script.sh

Starting the transfer

Before you submit the generated transfer script you should make sure everything is in order. You can try to run the transfer script directly on the UPPMAX login node and see if it starts or if you get any errors:

bash ~/dardel_transfer_script.sh

If you start see progress reports from rsync you know it works and you can press ctrl+c to stop.

Example of how it can look when it works:

bash darsync_temp.slurm
sending incremental file list
temp/
temp/counts
             10 100%    0,51kB/s    0:00:00 (xfr#4, to-chk=72/77)
temp/export.sh
             13 100%    0,67kB/s    0:00:00 (xfr#5, to-chk=71/77)
temp/my_stuff.py
             70 100%    3,60kB/s    0:00:00 (xfr#7, to-chk=69/77)
temp/run.sh
             52 100%    2,67kB/s    0:00:00 (xfr#8, to-chk=68/77)
temp/sequence_tools.py
            345 100%   17,73kB/s    0:00:00 (xfr#9, to-chk=67/77)
temp/similar_sequences.txt
             24 100%    1,23kB/s    0:00:00 (xfr#10, to-chk=66/77)
temp/t.py
            328 100%   16,86kB/s    0:00:00 (xfr#11, to-chk=65/77)

Example of how it can look when it doesn't work:

bash darsync_temp.slurm
user@dardel.pdc.kth.se: Permission denied (publickey,gssapi-keyex,gssapi-with-mic).
rsync: connection unexpectedly closed (0 bytes received so far) [sender]
rsync error: unexplained error (code 255) at io.c(231) [sender=3.2.7]

Troubleshooting

Apart from getting the username or paths wrong, we foresee that the most common problem will be to get the SSH keys generated, added to the PDC login portal, and adding the UPPMAX ip/hostname as authorized for that SSH key. Please see the PDC user guide on how to set up SSH keys. Once you have your key created and added to the login portal, go to the login portal again and add the address *.uppmax.uu.se to your key to make it work from Rackham.